Maximize Efficiency with Our Micro Air Consumption Blower Heat Regeneration Adsorption Dryer
- Inlet Air Temperature: 45°C
- Pressure Range: 0.6-1.0Mpa
- Pressure Dew Point: ≤-40°C
- Pressure Loss: 3% of design pressure
- Inlet Oil Content: ≤0.1PPm
- Control Power Supply: AC 380V/220V/50Hz
- Cycle: T=8h
- Regeneration Gas Consumption: ≤2-3%
Product Features
1. Use high-quality, high-efficiency desiccant with stable dew point
2. Pressure dew point can reach -40°C, customizable -70°C
3. Advanced energy consumption management to reduce operating costs
4. Use natural air to heat the desiccant, reducing finished gas
5. Temperature controlled regeneration and cold blowing
6. Large-sized tower and flow control, minimum risk of desiccant wear
7. Stainless steel valve plate
8. Instrument air source with filter pressure reducing valve
9. Equipped with high temperature protection device and low power density electric heater, long life and low risk
10. Use high-quality blower
| Model | Air Capacity | Voltage | Air connection pipe diameter | Dimensions(mm) |
| SLT-110MBF | 11 | 380v | DN50 | 1490*800*2140 |
| SLT-140MBF | 14 | 380v | DN50 | 1490*800*2140 |
| SLT-180MBF | 18 | 380v | DN65 | 1650*850*2430 |
| SLT-220MBF | 22 | 380v | DN65 | 1650*850*2430 |
| SLT-280MBF | 28 | 380v | DN80 | 1860*900*2590 |
| SLT-320MBF | 32 | 380v | DN80 | 1860*900*2590 |
| SLT-380MBF | 38 | 380v | DN100 | 2170*1000*2680 |
| SLT-450MBF | 45 | 380v | DN100 | 2170*1000*2680 |
| SLT-520MBF | 52 | 380v | DN125 | 2280*1600*2750 |
| SLT-600MBF | 60 | 380v | DN125 | 2280*1600*2750 |
| SLT-720MBF | 72 | 380v | DN125 | 2490*1750*2190 |
| SLT-800MBF | 80 | 380v | DN125 | 2490*1750*2190 |
| SLT-1000MBF | 100 | 380v | DN150 | 2850*1850*3020 |
| SLT-1200MBF | 120 | 380v | DN150 | 2850*1850*3020 |
| SLT-1500MBF | 150 | 380v | DN200 | 3300*2450*3400 |
| SLT-1800MBF | 180 | 380v | DN200 | 3800*2700*3600 |
| SLT-2000MBF | 200 | 380v | DN200 | 4160*2800*3750 |
