Experience Ultimate Energy Savings with Zero Air Consumption Blower Heat Regeneration Adsorption Dryer
- Inlet Air Temperature: 45°C
- Pressure Range: 0.6~1.0Mpa
- Pressure Dew Point: ≤-40°C
- Pressure Loss: ≤3% of design pressure
- Water Inlet Temperature: ≤32°C
- CInlet Oil Content: ≤0.1PPm
- Control Mode: PLC
- Control Power Supply: AC 380V/220V/50HZ
- Cycle: T=8h
- Regeneration Mode: Blast heating regeneration
- Regeneration Gas Consumption: 0%
Product Features
1. Use high-quality, high-efficiency desiccant with stable dew point
2. Pressure dew point can reach -40°C, customizable -70°C
3. Zero gas consumption energy-saving design.
4. Use natural air to heat desiccant
5. Internal circulation cold blowing, zero gas consumption for regeneration
6. Temperature controlled regeneration and cold blowing
7. Online dew point real-time monitoring
8. Large-size tower and flow control, minimum risk of desiccant wear
9. Double eccentric hard seal valve (high temperature resistant)
10. Smaller air side pressure loss of finned cooler
11. Valve position holding/fault alarm/feedback function
12. Use high-quality blower
13. Equipped with high-temperature protection device and low-power density electric heater, long life and low risk
| Model | Air Capacity | Voltage | Air connection pipe diameter | Dimensions(mm) |
| SLT-140ZBF/W | 14 | 380v | DN50 | 1490*800*2140 |
| SLT-180ZBF/W | 18 | 380v | DN65 | 1650*850*2430 |
| SLT-220ZBF/W | 22 | 380v | DN65 | 1650*850*2430 |
| SLT-280ZBF/W | 28 | 380v | DN80 | 1860*900*2590 |
| SLT-320ZBF/W | 32 | 380v | DN80 | 1860*900*2590 |
| SLT-380ZBF/W | 38 | 380v | DN100 | 2170*1000*2680 |
| SLT-450ZBF/W | 45 | 380v | DN100 | 2170*1000*2680 |
| SLT-520ZBF/W | 52 | 380v | DN125 | 2280*1600*2750 |
| SLT-600ZBF/W | 60 | 380v | DN125 | 2280*1600*2750 |
| SLT-720ZBF/W | 72 | 380v | DN125 | 2490*1750*2190 |
| SLT-800ZBF/W | 80 | 380v | DN125 | 2490*1750*2190 |
| SLT-1000ZBF/W | 100 | 380v | DN150 | 2850*1850*3020 |
| SLT-1200ZBF/W | 120 | 380v | DN150 | 2850*1850*3020 |
| SLT-1500ZBF/W | 150 | 380v | DN200 | 3300*2450*3400 |
| SLT-1800ZBF/W | 180 | 380v | DN200 | 3800*2700*3600 |
| SLT-2000ZBF/W | 200 | 380v | DN200 | 4160*2800*3750 |
