Zero Air Consumption Compression Heat Regeneration Adsorption Dryer
- Inlet Air Temperature: 110°C
- Pressure Range: 0.6~1.0Mpa
- Pressure Dew Point: -20~-40°C
- Pressure Loss: ≤5% of design pressure
- Water Inlet Temperature: ≤32°C
- CInlet Oil Content: ≤0.1PPm
- Control Mode: PLC
- Control Power Supply: AC 220V/50HZ
- Cycle: T=8h
- Regeneration Gas Consumption: 0%
Product Features
1. Use high-quality, high-efficiency desiccant with stable dew point
2. Zero gas consumption energy-saving design
3. Use excess heat from the compressor for heating and regeneration
4. No heating energy consumption
5. No compressed gas discharge during operation
6. Large-size tower and flow control
7. Minimum risk of desiccant wear
8. High-reliability design, stable operation
9. High-temperature resistant double-eccentric hard-sealed butterfly valve
10. Finned cooler Finned structure, built-in internal separation, compact structure, low pressure loss
11. Valve position holding/fault alarm/feedback function
12. Online dew point real-time monitoring
| Model | Air Capacity | Voltage | Air connection pipe diameter | Dimensions(mm) |
| SLT-220 | 22 | 220v | DN65 | 2350*1450*2450 |
| SLT-320 | 32 | 220v | DN80 | 2500*1750*2550 |
| SLT-450 | 45 | 220v | DN100 | 2600*1900*2650 |
| SLT-520 | 52 | 220v | DN125 | 2800*2000*2750 |
| SLT-600 | 60 | 220v | DN125 | 3300*2350*3150 |
| SLT-720 | 72 | 220v | DN125 | 3500*2550*3150 |
| SLT-800 | 80 | 220v | DN125 | 3500*2750*3250 |
| SLT-1000 | 100 | 220v | DN150 | 3780*2850*3350 |
| SLT-1200 | 120 | 220v | DN150 | 3780*2850*3350 |
| SLT-1500 | 150 | 220v | DN150 | 3950*2950*3650 |
| SLT-1800 | 180 | 220v | DN200 | 4200*2950*3650 |
| SLT-2000 | 200 | 220v | DN200 | 4750*3200*3650 |
| SLT-2200 | 220 | 220v | DN200 | 4850*3250*3750 |
| SLT-2500 | 250 | 220v | DN200 | 5200*3450*3750 |
| SLT-3000 | 300 | 220v | DN250 | 6200*3910*4200 |
